What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
12.06.2025 06:29

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
(Dc diagram shown, AC is similar).
What does it mean if you dream your dad died?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
It seems Mohan does not understand the difference between a comment and an Answer.
So, the voltage could go up to 500 volts, and the fuse will not open up.
What would it take for you to consider yourself a "Swiftie" like Flavor Flav?
These are simplified answers to the original question, and does not change anything I wrote above.
The MOV will conduct when the voltage exceeds 50% of line voltage.
The bolt then partially travels down the line to your home.
Why don't younger men like older women?
but I think this circuit , shows a few more pieces.
2024–10–10[John johnson John Johnson ]
[old diagram got deleted by accident]
How to watch George Clooney in ‘Good Night, and Good Luck’ live for free - New York Post
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
eight
I have BPD. Why do I destroy everyone I love?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–10–14 [Omar Gharbi Omar Gharbi ]
Now when you have a certain ac resistance, then a current flows in a loop.
Bruins Hire Former Forward Marco Sturm As New Head Coach - NESN
Barnstars:
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
A fuse is a non-resetable over current circuit protector.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
what exactly is a ‘surge’ protector?
Did Obito ever fully redeem himself in everyone's eyes?
2024–10–16 [ OO OLAOYE OYEBODE ]
Edit 2024–10.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
If gays can get married, why can't I marry my dog or a cheeseburger?
Here is a simplified AC power diagram.
The third is lightning and “how it gets conducted into a home.”
He then describes Rainy Season and Lightning.
nine
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
But it can get overloaded, and no longer works.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
He then asserts :
At one ohm, the resistor has a maximum of 1 watt power.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
I post the exact comment here.
One
but this device (an Inductor) … impedes the rapid changes in the current.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This one hit behind the barn.
In schematic diagrams this is the symbol for a fuse:
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is 'the assistant's answer'
so, what happens?
He then describes the function of a fuse.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
a photo is worth a thousand words.
But… the neutral is now “floating” because of the 1 ohm resistance.
For this case there are devices called Metal oxide varistors (MOV).
Because the load is inductive, the current lags the voltage.(by a bit).
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
The other is “what does a “fuse” do?”
This is the picture of an electronic coil of wire wound around a core of magnetic material.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
This device then solves the entire problem.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
It also is a device that limits the change in current flow.
At least they know the answer if they wanted it.
An AC voltage/ current source, and an ac inductive load.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
What is lightning?
[image of Common-mode choke]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
These devices are installed between the “hot” and “neutral” and protective ground.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
There are two important concepts here.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is where the MOV conducts again, and dissipated the energy.
Upvotes:
the problem then depends on "how fast does the fuse operate?".
There are three different concepts here that are getting confused.
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
One is “what exactly is in a ‘surge protector’ ? ”
First Sentence:
What does a fuse do?
A circuit breaker is similar, but is resettable.